dc.contributor.author |
Веремей, Г. О.
|
|
dc.contributor.author |
Сапон, С. П.
|
|
dc.date.accessioned |
2016-09-13T07:53:25Z |
|
dc.date.available |
2016-09-13T07:53:25Z |
|
dc.date.issued |
2015 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/11144 |
|
dc.description |
Veremey, G. An experimental research of the accuracy of overhauled valve seats with the variable cutting conditions / G. Veremey, S. Sapon // Technological Complexes. - 2015. - №1/2 (12). - P. 62-69. |
en_US |
dc.description.abstract |
One of the most important quality indicators in the valve seats overhauled process of
the timing gear in the internal combustion engine is a parameter of deviation from roundness which is formed during their machining in a car repairing industry. In this work variation influence of the process conditions on the geometric precision valve seats during their formation was experimentally researched. According to the results of the ivestigation the rational cutting conditions were defined, that allows to provide a minimal deviation from the roundness of the valve seats. |
en_US |
dc.description.sponsorship |
Одним из наиболее важных показателей качества в восстановительном процессе
сёдел клапанов газораспределительного механизма в двигателе внутреннего сгорания является параметр отклонения от круглости сёдел, формируемый при их обработке в авторемонтном производстве. В работе экспериментально исследовано влияние изменения режимов обработки на геометрическую точность сёдел клапанов в процессе их формообразования. В результате исследования выявлены рациональные режимы резания, позволяющие обеспечить минимальное отклонение от круглости сёдел клапанов при их восстановлении. |
en_US |
dc.language.iso |
en |
en_US |
dc.relation.ispartofseries |
Technological Complexes;№1/2 (12) |
|
dc.subject |
machining accuracy |
en_US |
dc.subject |
overhaul |
en_US |
dc.subject |
deviation from roundness |
en_US |
dc.subject |
formation process |
en_US |
dc.subject |
cutting conditions |
en_US |
dc.subject |
точность обработки |
en_US |
dc.subject |
восстановительный ремонт |
en_US |
dc.subject |
процесс формообразования |
en_US |
dc.subject |
режимы резания |
en_US |
dc.title |
An experimental research of the accuracy of overhauled valve seats with the variable cutting conditions |
en_US |
dc.title.alternative |
Экспериментальное исследование точности восстановливаемых сёдел клапанов при изменении режимов резания |
en_US |
dc.type |
Article |
en_US |