dc.contributor.author |
Майборода, В. С.
|
|
dc.contributor.author |
Гаврушкевич, Н. В.
|
|
dc.contributor.author |
Слободянюк, І. В.
|
|
dc.contributor.author |
Позняк, К. О.
|
|
dc.date.accessioned |
2021-12-23T13:16:28Z |
|
dc.date.available |
2021-12-23T13:16:28Z |
|
dc.date.issued |
2021 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/24790 |
|
dc.description |
Майборода, В. С. Застосування магнітно-абразивного оброблення стоматологічного інструменту багаторазового використання для відновлення його властивостей / В. С. Майборода, Н. В. Гаврушкевич, І. В. Слободянюк, К. О. Позняк // Технічні науки та технології. – 2021. – № 3(25). – С. 9-16. |
en_US |
dc.description.abstract |
На основі аналізу особливостей процесу експлуатації та подальшого циклу оброблення стоматологічних борфрез багаторазового використання представлено обґрунтування можливості застосування на етапі передстерилізаціного очищення методу магнітно-абразивного оброблення поверхонь робочих частин твердосплавних борів кулеподібної форми.
Виконано аналіз стану поверхні та параметрів шорсткості робочих поверхонь борфрез до та після магнітно-абразивного оброблення. Надані рекомендації щодо часу оброблення та діапазонів розмірів різальних кромок борів, що забезпечують збільшення термінів експлуатації. |
en_US |
dc.language.iso |
uk |
en_US |
dc.publisher |
Чернігів : НУ "Чернігівська політехніка" |
en_US |
dc.relation.ispartofseries |
Технічні науки та технології;№ 3(25) |
|
dc.subject |
магнітно-абразивне оброблення |
en_US |
dc.subject |
стоматологічний інструмент |
en_US |
dc.subject |
твердосплавні борфрези |
en_US |
dc.subject |
передстерилізаційне очищення |
en_US |
dc.subject |
ширина різальної кромки |
en_US |
dc.subject |
шорсткість поверхні |
en_US |
dc.subject |
magneto-abrasive machining |
en_US |
dc.subject |
dental instrument |
en_US |
dc.subject |
carbide burs |
en_US |
dc.subject |
pre-sterilization cleaning |
en_US |
dc.subject |
cutting edge width |
en_US |
dc.subject |
surface roughness |
en_US |
dc.title |
Застосування магнітно-абразивного оброблення стоматологічного інструменту багаторазового використання для відновлення його властивостей |
en_US |
dc.title.alternative |
Using magneto-abrasive machining of reusable dental tools for restoring its properties |
en_US |
dc.type |
Article |
en_US |
dc.description.abstractalt1 |
A reusable dental instrument like a burs type, after each intended use, is subject to a treatment cycle, which includes disinfection, pre-sterilization cleaning, sterilization.
The consequences of some defects and damages that arise during exploitation and cleaning under the influence of ag- gressive media can be eliminated using magneto-abrasive machining, which is proposed to be brought into the treatment cycle of burs at the stage of pre-sterilization cleaning.
At present, there is no information on the application of the method of magneto-abrasive machining (MAM) use at the stage of pre-sterilization cleaning to restore the working capacity of the dental burs, which were repeatedly used for their intended purpose.
The aim of the work was the confirmation of the feasibility of using this method in the technological chain of treatment dental burs at the stages preceding sterilization.
The result of the work is the confirmation of possibility of extending the working life of dental burs by sharpening their cutting edges and improving the state of microgeometry of working surfaces after use and a standard cleaning cycle, excluding the factor - dependence on the qualifications of auxiliary personnel.
Roughness parameters were measured before and after magneto-abrasive machining on the front and rear surfaces of the cutting parts of the burs. The efficiency of machining (sharpening) the edges of the burs was evaluated in terms of the ratio of the width of the edge before MAM to the width of the edge after MAM.
The results of the carries out studies showed that the using of MAM of burs in the technological chain of cleaning the reusable dental instrument is advisable and can be used instead of the operation of pre-sterilization cleaning, which is per- formed traditionally. |
en_US |