dc.contributor.author |
Дегтярьов, І. М.
|
|
dc.contributor.author |
Нешта, А. О.
|
|
dc.contributor.author |
Самардак, М. П.
|
|
dc.contributor.author |
Кононович, В. М.
|
|
dc.contributor.author |
Кушніров, П. В.
|
|
dc.contributor.author |
Бага, В. М.
|
|
dc.contributor.author |
Клок, Я. В.
|
|
dc.date.accessioned |
2021-12-23T13:47:42Z |
|
dc.date.available |
2021-12-23T13:47:42Z |
|
dc.date.issued |
2021 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/24792 |
|
dc.description |
Дегтярьов, І. М. Аналіз застосування конструкцій та області контакту штифтових конічних з’єднань з конусністю 1:50 / І. М. Дегтярьов, А. О. Нешта, М. П. Самардак, В. М. Кононович, П. В. Кушніров, В. М. Бага, Я. В. Клок // Технічні науки та технології. – 2021. – № 3(25). – С. 26-37. |
en_US |
dc.description.abstract |
На основі геометричного аналізу області контакту штифтового конічного з’єднання встановлено параметри, що впливають на тип контакту отвору і штифта. Уперше встановлена та запропонована у вигляді формули залежність величини відхилення кута отвору під штифт від допусків на параметри розгорток конічних. У роботі як реко- мендації конструктору для проєктування штифтових конічних з’єднань із конусністю 1:50 представлені графіки залежності відхилення кутів отвору та штифтів класів точності А і В від їхнього номінального значення. Також визначена сумарна відносна похибка відхилення кутів отвору та штифта від номінального значення кута для усіх стандартних значень діаметрів штифтових конічних з’єднань. |
en_US |
dc.language.iso |
uk |
en_US |
dc.publisher |
Чернігів : НУ "Чернігівська політехніка" |
en_US |
dc.relation.ispartofseries |
Технічні науки та технології;№ 3(25) |
|
dc.subject |
насособудування |
en_US |
dc.subject |
клас точності |
en_US |
dc.subject |
допуск |
en_US |
dc.subject |
конструкторська документація |
en_US |
dc.subject |
номінальний розмір |
en_US |
dc.subject |
pump production |
en_US |
dc.subject |
accuracy class |
en_US |
dc.subject |
tolerance |
en_US |
dc.subject |
design documentation |
en_US |
dc.subject |
nominal size |
en_US |
dc.title |
Аналіз застосування конструкцій та області контакту штифтових конічних з’єднань з конусністю 1:50 |
en_US |
dc.title.alternative |
Nalysis of application of structures and contact area of tapered pins with taper 1:50 |
en_US |
dc.type |
Article |
en_US |
dc.description.abstractalt1 |
There is currently no alternative to the use of tapered pins in the manufacture and assembly of parts and assemblies where high accuracy of mutual placement is required, as well as the ability to perform quick assembly and disassembly while maintaining the initial accuracy parameters. Tapered pins with a taper of 1:50 have become especially widely used due to their design features.
At the moment, the operational adaptability of the design comes to the fore for the customer, in which tapered pin is one of the main components of the product quality as a whole. However, during production in enterprises, due to the lack of information on the working and assembly drawings of parts containing tapered pins, as well as other related factors, situations often arise with the occurrence of defects in this connection.
A review of recent research and publications on the analysis of geometric parameters and properties of tapered pins has shown that the analysis of the contact area in the connection, to date, little attention is paid in scientific papers and literature used by designers in the design of components containing pins with a taper of 1:50.
The aim of the article is to establish the type of contact in tapered pins with a taper of 1:50 depending on the tolerances on the diametrical and angular dimensions of a hole and a pin.
Based on the analysis of geometric parameters in the contact area of tapered pins, the types of contacts are established and for the first time the geometric dependence of the deviation of a hole angle under the pin on the tolerances on the parameters of conical scans is presented. Graphs of the deviation of hole angles and pins of accuracy classes A and B used in tapered pins are obtained from their nominal value, as well as the size of the diametrical gap on the larger diameter of the pin depending on the nominal diameter of the connection. These graphs can be used by the designer as reference recommendations when designing assemblies containing pins with a taper of 1:50. The values of the total relative error of deviation of a hole and pin angles from the nominal value for all standard diameters of tapered pins are determined. |
en_US |