Показати скорочений опис матеріалу
dc.contributor.author | Совгуть, М. | |
dc.contributor.author | Косогін, О. | |
dc.date.accessioned | 2024-03-28T13:02:37Z | |
dc.date.available | 2024-03-28T13:02:37Z | |
dc.date.issued | 2023 | |
dc.identifier.uri | http://ir.stu.cn.ua/123456789/29909 | |
dc.description | Совгуть, М. Електрохімічне визначення формальдегіду / М. Совгуть, О. Косогін // Технічні науки та технології. - 2023. - № 4 (34). - С. 195-206. | uk_UA |
dc.description.abstract | Запропоновано проводити визначення формальдегіду (НСОН) електрохімічним методом. Встановлено, що надійне детектування НСОН можливе по величині струму його окиснення в лужному середовищі. Методом аналізу вольт-амперних кривих встановлено потенціали робочого електрода, за яких можливе окиснення НСОН. Запропоновано використовувати двохелектродну схему електрохімічного сенсора, що дозволить відмовитись від використання зовнішнього потенціостатуючого пристрою та зменшить енергоспоживання для роботи сенсора. Показано, що мо-жливе визначення НСОН з використанням двохелектродної комірки, в якій робочий електрод виконано з платинова-ного титану, і потенціал якій задається товстошаровим допоміжним електродом, що містить в своєму складі діоксид мангану марки ЕДМ-2. Розроблена комірка після оптимізації складу може бути використана у складі сенсора для визначення формальдегіду в водному середовищі. | uk_UA |
dc.language.iso | uk | uk_UA |
dc.publisher | Чернігів : НУ "Чернігівська політехніка" | uk_UA |
dc.relation.ispartofseries | Технічні науки та технології;№ 4 (34) | |
dc.subject | formaldehyde | uk_UA |
dc.subject | electrochemical determination | uk_UA |
dc.subject | voltammetry | uk_UA |
dc.subject | working electrode | uk_UA |
dc.subject | auxiliary electrode | uk_UA |
dc.subject | sensor | uk_UA |
dc.subject | platinum-plated titanium | uk_UA |
dc.subject | manganese dioxide | uk_UA |
dc.subject | формальдегід | uk_UA |
dc.subject | електрохімічне окиснення | uk_UA |
dc.subject | вольтамперометрія | uk_UA |
dc.subject | робочий електрод | uk_UA |
dc.subject | допоміжний електрод | uk_UA |
dc.subject | сенсор | uk_UA |
dc.subject | платинований титан | uk_UA |
dc.subject | діоксид мангану | uk_UA |
dc.title | Електрохімічне визначення формальдегіду | uk_UA |
dc.title.alternative | Electrochemical determination of formaldehyde | uk_UA |
dc.type | Article | uk_UA |
dc.description.abstractalt1 | Pollution of the air and water environment with formaldehyde as a result of anthropogenic influence is a serious problem in Ukraine and the world. Even small amounts of formaldehyde have a negative impact on human health, so it is important to regularly monitor the content of the pollutant in water environments. Direct and indirect methods of analysis are commonly used to determine formaldehyde, however, such methods are ex-pensive, require expensive reagents, and have low sensitivity. That is why there is a need to develop an electrochemical method based on oxidation/reduction processes of formaldehyde on electrodes. The use of an electrochemical method for the determi-nation of formaldehyde makes it possible to develop sensitive devices suitable for its operational monitoring. The purpose of this work is to research electrode materials suitable for electrochemical oxidation of formaldehyde and to create an electrochemical system, the use of which will allow obtaining more accurate and sensitive results, which is im-portant for reliable control over the level of formaldehyde in solutions. The studies were carried out using platinum and platinum-plated titanium as working electrodes, the working solution was sodium hydroxide 0.1 mol/dm3 and 30% formaldehyde solution as the starting solution, which was used to create the required concentration in the working solution by dilution. The study of the behavior of electrode materials in various solutions was carried out using a three-electrode circuit by the method of cyclic voltammetry with a linear sweep of the potential. As a result, the oxidation potential of formaldehyde was determined, which was 0.3 V for platinum-plated titanium. In the potenti-ostatic mode, the dependence of the formaldehyde oxidation current on its concentration in the solution was investigated. The composition of the auxiliary electrode is proposed - a dispersed titanium with the addition of EDM-2 manganese dioxide, and its low polarization under the action of cathodic and anodic currents is determined. On the basis of the obtained results, a two-electrode system is proposed for determining of formaldehyde content in aqueous media, using which a linear dependence of the current generated at the working electrode on the concentration of formaldehyde in the solution is obtained, which makes it possible to draw a conclusion about the suitability of the created system for monitoring the formaldehyde content in aqueous solutions. | uk_UA |