dc.contributor.author |
Кальченко, В. В.
|
|
dc.contributor.author |
Венжега, В. І.
|
|
dc.contributor.author |
Пасов, Г. В.
|
|
dc.contributor.author |
Кологойда, А. В.
|
|
dc.contributor.author |
Кужельний, Я. В.
|
|
dc.contributor.author |
Богославський, В.
|
|
dc.date.accessioned |
2024-04-29T09:00:47Z |
|
dc.date.available |
2024-04-29T09:00:47Z |
|
dc.date.issued |
2024 |
|
dc.identifier.uri |
http://ir.stu.cn.ua/123456789/30048 |
|
dc.description |
Підвищення якості контролю параметрів деталей при виготовленні та ремонті автомобілів / В. Кальченко, В. Венжега, Г. Пасов, А. Кологойда, Я. Кужельний, В. Богославський // Технічні науки та технології. - 2024. - № 1 (35). - С. 9-17. |
uk_UA |
dc.description.abstract |
У роботі досліджено вимоги по точності до основних класів деталей автомобілів та методи контролю їх лінійних і кутових розмірів, відхилень форми і розташування поверхонь, прихованих дефектів при виробництві та ремонті автомобілів. Одним із перспективних напрямів підвищення якості виготовлення автомобільної продукції та
проведення ремонтів, підвищення конкурентоспроможності продукції є покращення роботи відділів технічного контролю, які саме і здійснюють контроль на всіх етапах виробництва та за готовою продукцією на підприємстві. На
основі проведеного аналізу пропонується поряд із використанням механічних, оптичних, пневматичних та електричних засобів вимірювання як найширше використовувати засоби нового типу – координатно-вимірювальні машини, що
призначені для контролю складних корпусних деталей, точного вимірювання довжин, похибок форми й інших параметрів, сучасні кругломіри та прилади для вимірювання шорсткості з автоматичною обробкою інформації та управлінням від персонального комп’ютера.
Стаття є публікацією науково-методичного характеру. |
uk_UA |
dc.language.iso |
uk |
uk_UA |
dc.publisher |
Чернігів : НУ "Чернігівська політехніка" |
uk_UA |
dc.relation.ispartofseries |
Технічні науки та технології;№ 1 (35) |
|
dc.subject |
вимірювання |
uk_UA |
dc.subject |
контроль |
uk_UA |
dc.subject |
розміри |
uk_UA |
dc.subject |
шорсткість |
uk_UA |
dc.subject |
засоби вимірювання |
uk_UA |
dc.subject |
координатно-вимірювальні машини |
uk_UA |
dc.subject |
measurement |
uk_UA |
dc.subject |
control |
uk_UA |
dc.subject |
dimensions |
uk_UA |
dc.subject |
roughness |
uk_UA |
dc.subject |
measuring tools |
uk_UA |
dc.subject |
coordinate measuring machines |
uk_UA |
dc.title |
Підвищення якості контролю параметрів деталей при виготовленні та ремонті автомобілів |
uk_UA |
dc.title.alternative |
Improving the quality of the control of parts parameters in the manufacture and repair of vehicles |
uk_UA |
dc.type |
Article |
uk_UA |
dc.description.abstractalt1 |
Technical control is an integral part of the production process. The main task of technical control at the enterprise is the
timely receipt of complete and reliable information about the quality of products, the state of the equipment and the technological
process in order to prevent malfunctions and deviations that may lead to violations of the requirements of standards and
technical conditions. In mechanical engineering, it is a set of control operations that are performed at all stages of production
by various departments of the enterprise depending on the object of control.
Technical control ensures the necessary configuration of the production process and maintains its stability, i.e. stable
repeatability of each operation in the prescribed technological regimes, norms and conditions. The objects of technical control
at the machine-building enterprise are materials, semi-finished products at various stages of production, finished products
(parts, small assembly units, assemblies, blocks, products), means (equipment, tools, devices, devices), technological processes
and processing modes, general culture of production.
Therefore, improving the quality of control operations at all stages of production and quality control of finished products
is a necessary condition for improving the quality and level of competitiveness of products.
The work analyzes the accuracy characteristics of the main classes of car parts, which most affect its performance and
durability, and which are subject to strict requirements for the accuracy of dimensions, shape deviations and mutual location,
roughness, absence of defects on working surfaces, and currently existing methods and means of control cannot fully ensure
the measurement of these parameters, and therefore there is an urgent need to introduce fundamentally new modern computerized
means of their control, such as coordinate measuring machines, circular gauges, devices for controlling roughness.
The article is a scientific and methodological publication. |
uk_UA |