Показати скорочений опис матеріалу
dc.contributor.author | Кирик, В. | |
dc.contributor.author | Халіков, В. | |
dc.contributor.author | Жерносєков, А. | |
dc.contributor.author | Шатан, О. | |
dc.date.accessioned | 2024-05-21T13:24:01Z | |
dc.date.available | 2024-05-21T13:24:01Z | |
dc.date.issued | 2024 | |
dc.identifier.uri | http://ir.stu.cn.ua/123456789/30166 | |
dc.description | Комутаційний струм первинної обмотки трансформатора при варіаціях струму його холостого ходу / В. Кирик, В. Халіков, А. Жерносєков, О. Шатан // Технічні науки та технології. - 2024. - № 1 (35). - С. 251-258. | uk_UA |
dc.description.abstract | У роботі розглянуто аспекти перехідних процесів, що виникають при комутації силових трансформаторів. Показано, що увімкнення трансформатора супроводжується суттєво значними, проте в подальшому спадними в часі сплесками струму в первинній обмотці. При цьому більшим значенням сплесків струму відповідають менші величини холостого ходу трансформатора і навпаки, його значні величини сприяють пропорціональному зменшенню такого роду комутаційних проявів у вхідному струмі трансформатора. Наголошено, що при повторно-короткочасному режимі комутації трансформатора, збільшення величини струму холостого ходу трансформатора, яке у зварювальних установках спрямовується на стабілізацію горіння дуги змінного струму, також спричиняє ще один позитивний ефект – пропорціональне зменшення сплесків струму намагнічування в його первинній обмотці. | uk_UA |
dc.language.iso | uk | uk_UA |
dc.publisher | Чернігів : НУ "Чернігівська політехніка" | uk_UA |
dc.relation.ispartofseries | Технічні науки та технології;№ 1 (35) | |
dc.subject | transformer | uk_UA |
dc.subject | magnetic flux | uk_UA |
dc.subject | magnetic field saturation | uk_UA |
dc.subject | idle | uk_UA |
dc.subject | switch | uk_UA |
dc.subject | commutation | uk_UA |
dc.subject | transient process | uk_UA |
dc.subject | modeling | uk_UA |
dc.subject | трансформатор | uk_UA |
dc.subject | магнітний потік | uk_UA |
dc.subject | насичення магнітопроводу | uk_UA |
dc.subject | холостий хід | uk_UA |
dc.subject | ключ | uk_UA |
dc.subject | комутація | uk_UA |
dc.subject | перехідний процес | uk_UA |
dc.subject | моделювання | uk_UA |
dc.title | Комутаційний струм первинної обмотки трансформатора при варіаціях струму його холостого ходу | uk_UA |
dc.title.alternative | Switching current of the primary winding of the transformer with variations in its no-load current | uk_UA |
dc.type | Article | uk_UA |
dc.description.abstractalt1 | Transformers are an indispensable component of various types of electrical circuits. Various restrictions are imposed on the transformer switching operation, which are caused by the functional purpose of the systems, their configuration, parameters and characteristics of existing or available switching components or devices and associated transient processes. When the power transformer is switched on asynchronously, current surges in its primary winding, including in modes close to the minimum load, may exceed its nominal current by several times. Such processes are undesirable from the point of view of energy efficiency, electromagnetic compatibility, transformer reliability and the functioning of protection systems. Proper analysis of electromagnetic processes was performed by numerical calculation methods followed by computer modeling using the MATLAB/Simulink software package. The purpose of the study is to highlight the extreme nature of switching current surges of the primary transformer and their dependence on the relative value of the no-load current of the winding. This current, in turn, depends on the slope of the main functional segment of the magnetization curve of the transformer core corresponding to its stationary mode of operation. The research shows that the increase in the idle speed of the transformer causes a directly proportional decrease in the switching current surges of the primary winding of the transformer. At the same time, the difference between the amplitude values of adjacent semi-periodic current surges decreases. It is noted that an increase in the value of the transformer's no-load current is often aimed at stabilizing the burning of the alternating current arc in electric welding installations. They are characterized by a repeated short-term mode of switching, and therefore the determination of the magnitude of switching current surges is relevant here. | uk_UA |